STUDI PENGARUH JENIS KEMASAN DAN KETEBALAN PLASTIK TERHADAP KARAKTERISTIK MUTU REBUNG BAMBU TABAH (Gigantochloa nigrociliata KURZ) KERING

Authors

  • Yustina Anggreny Lobo Program Studi Teknik Pertanian, Fakultas Teknologi Pertanian, Universitas Udayana
  • Pande Ketut Diah Kencana Program Studi Teknik Pertanian, Fakultas Teknologi Pertanian, Universitas Udayana
  • Gede Arda Program Studi Teknik Pertanian, Fakultas Teknologi Pertanian, Universitas Udayana

DOI:

https://doi.org/10.24843/JBETA.2014.v02.i01.p05

Keywords:

dried bamboo shoots, packaging, plastics pe and pp, long storage

Abstract

This study was conducted to determine the effect of the type of plastic packaging with different thickness of the characteristics of dried bamboo shoots (Gigantochloa nigociliata KURZ). This study is also expected to increase the shelf life of bamboo shoots by using proper plastic packaging. The design used was a randomized block design with two factors. The first factor is the type of plastic with two different thicknesses with details P1: dried bamboo shoots packed with a thickness of 0.04 mm Polypropylene plastic, P2: dried bamboo shoots packed with a thickness of 0.08 mm PP plastic, P3: dried bamboo shoots packed with PE plastic thickness 0.04 mm, P4: bamboo shoots packed with a thickness of 0.08 mm Polyethylene plastic. And the second factor is the storage time with details of H1: 10 days, H2: 20 days, H3: 30 days, H4: 40 days. The study was repeated three times. Parameters observed in this study include analysis of weight, water content, texture and water absorption. The results of this study indicated that the type of plastic packaging, thickness and storage time gave significant effect on characteristics of dried bamboo shoots. The polypropylene plastic with a thickness of 0,08 mm is the best type of plastic packaging, because it has the lowest water content and lowest weight during 40 days of storage.

References

Buckle, K.A.,R.A. Edwards, G.H. Fleet. Dan M. Wooton. 1987. Ilmu Pangan. Penerjemah Hari Purnomo dan Adiono. UI – Press. Jakarta.

Kencana, Pande Ketut Diah. 2009. “Fisiologi dan Teknologi Pascapanen Rebung Bambu Tabah (Gigantochloa Nigrociliata Kurz) Fresh Cut”. Fakultas Pertanian. Universitas Brawijaya. Malang.

Sathe, S.K. dan D.K.Salunkhe. 1981. Isolation Partion, Characterization and Modification Of The Great Northem Bean (Pahseulus Vulgaris) Starch. Jurnal Food Science (46) : 617-621

Sudarmadji, S.,Haryono, B., dan Suhardi.1984. Prosedur Analisa untuk Bahan Makanan dan Pertanian. Liberty. Yogyakarta

Steel, R.G.D. dan J.H.Torrie. 1993. Prinsip dan Prosedur Statistik. Penerjemah Bambang Sumantri. PT. Gramedia Pustaka Utama, Jakarta.

Suyitno. 1990. Bahan – bahan Pengemas. Universitas Gajah Mada. Yogyakarta.

Syarief, R. dan Halid Hariyadi., 1993. Teknologi Penyimpanan Pangan, Arcan, Jakarta.

Winarno, F. G., S. Fardiaz, dan D. Fardiaz, 1980. Pengantar Teknologi Pangan.Gramedia, Jakarta

Winarno, F.G., 1994. Bahan Tambahan Makanan. Gramedia Pustaka Utama, Jakarta.

Downloads

Published

2015-12-11

How to Cite

Lobo, Y. A., Kencana, P. K. D., & Arda, G. (2015). STUDI PENGARUH JENIS KEMASAN DAN KETEBALAN PLASTIK TERHADAP KARAKTERISTIK MUTU REBUNG BAMBU TABAH (Gigantochloa nigrociliata KURZ) KERING. Jurnal BETA (Biosistem Dan Teknik Pertanian), 2(1), 1–10. https://doi.org/10.24843/JBETA.2014.v02.i01.p05

Issue

Vol. 2 No. 1 (2014): April

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

License Term

All articles published in Jurnal Beta (Biosistem dan Teknik Pertanian)  are open access and licensed under the Creative Commons Attribution 4.0 International License (CC BY 4.0). This means that anyone is free to:

  • Share — copy and redistribute the material in any medium or format.

  • Adapt — remix, transform, and build upon the material for any purpose, even commercially.

However, this is granted under the following conditions:

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

By submitting an article to Jurnal Beta (Biosistem dan Teknik Pertanian), authors agree to the publication of their work under this open access license. The authors retain the copyright of their work, but grant Jurnal Beta (Biosistem dan Teknik Pertanian)  the right of first publication.

For more information about the CC BY 4.0 license, please visit the official website: https://creativecommons.org/licenses/by/4.0/