The Effect of Hydrocooling and Plastic Types on the Quality of Sweet Corn (Zea mays L. Saccharata) During Cold Storage
DOI:
https://doi.org/10.24843/JBETA.2022.v10.i01.p06Keywords:
weight loss, material hardness, color, moisture content, cooling rateAbstract
Hydrocoolingis a simple way to quickly lower the temperature of food until the material temperature near the storage temperature. In addition, food packaging treatment can inhibit the rate of weight loss and product quality. This study used a completely randomized design (CRD) which consisted of two factors. The first factor wasthe immersion time in the hydrocoolingprocess (without soaking, 1 minute immersion, and 2 minutes of immersion (immersion water temperature 5oC ± 1)) and the second factor wasthe type of plastic (Polypropylene (PP) plastic type and High-DensityPolyethylene (HDPE) plastic). Each experimental unit was repeated 3 times and all experimental units were stored in a refrigerator with a temperature of 10oC ± 1. The parameters observed were a) moisture content, b) weight loss, c) material hardness, d) color, and e) cooling rate. Observations were made for 8 days with data retrieval intervals for 2 days. During cold storage sweet corn undergoes many physical changes. These changes began to appear on the 6th day. On the 6th day, sweet corn stored in cold storage experienced physical changes, namely wilting, wrinkling, starting to pale, and brownish color appeared at the tip to the base of the surface of the sweet corn. On the 8th day sweet corn experienced a 57decrease in weight loss and moisture content in the treatment without hydrocoolingand without packaging, while the hydrocoolingtreatment (1 minute and 2 minutes) and packed (with Polypropylene (PP) plastic and High-DensityPolyethylene plastic (HDPE) also experienced a decrease in water content and weight loss but still had a high average value of moisture content and weight loss. The result of the decrease in moisture content and weight loss affected the hardness of sweet corn, color, and cooling rate. The best treatment combination was obtained in thehydrocoolingtreatment for 2 minutes with Polypropylene (H2P1) packaging with a weight loss value of 0.33%, hardness 34.20 N / mm2, color L 50.00, a 16.69, b 51.81, water content 74.167%, and a cooling 2.3982 oC / 30 minutes.
References
Agustiningrum, D. A., Susilo, B., & Yulianingsih, R. (2014). Studi pengaruh konsentrasi oksigen pada penyimpanan atmosfer termodifikasi buah sawo (Achras zapota L.). Bioproses Komoditas Tropis, 2(1), 22–34.
Anggraini, R., & Sugiarti, T. (2018). Analisis pengemasan jagung manis (Zea mays L. saccharata Sturt) berkelobot dengan berbagai bahan pengemas. FoodTech: Jurnal Teknologi Pangan, 1, 25–31.
Anonim. (2008). Direktorat Jenderal Hortikultura. Departemen Pertanian, Jakarta.
Ansar, Murad, Sukmawaty, & Wati, S. (2020). Pengaruh jenis kemasan dan suhu penyimpanan terhadap karakteristik fisik jagung manis segar (Zea mays L.). Jurnal Ilmiah Rekayasa Pertanian dan Biosistem, 8(2), 147–154. https://doi.org/10.29303/jrpb.v8i2.180
Asiani, B., F., R., & Palungkun, R. (1993). Agribisnis tanaman sayur. Penebar Swadaya, Jakarta.
Awanis. (2013). Kombinasi suhu air dan lama perendaman pada hydrocooling untuk mempertahankan kesegaran sawi hijau (Brassica juncea). Jurnal Institut Pertanian Bogor, 16.
Awanis, & Darmawati, E. (2020). Pengaruh sistem pendinginan pada dua jenis suhu penyimpanan terhadap kesegaran sawi hijau (Brassica juncea). Jurnal Informasi Teknologi Pertanian (JITP), 1(1), 1–18.
Blongkod, N., Wenur, F., & Longdong, I. (2016). Kajian pengaruh prapendinginan dan suhu penyimpanan terhadap umur simpan brokoli. Jurnal Cocos, 7(5), 1–10.
Buckle, K. A., Edwards, R. A., Fleet, G. H., & Wootton, M. (1987). Ilmu pangan (Terjemahan). UI-Press, Jakarta.
Djarkasi, G. S. S., & Molenaar, R. (2017). Pengaruh umur panen terhadap sifat fisik tepung jagung manis (Zea mays saccharata Sturt). Jurnal Teknologi Pertanian, 8(1), 36–46.
Hadi, I. K. P. H. (2018). Pengaruh ketebalan plastik polietilen densitas rendah sebagai bahan kemasan terhadap mutu daun seledri (Apium graveolens L.) selama penyimpanan dingin, 1–9.
Hidayah, N., Istiani, A. N., & Septiani, A. (2020). Pemanfaatan jagung (Zea mays) sebagai bahan dasar pembuatan keripik jagung untuk meningkatkan perekonomian masyarakat di Desa Panca Tunggal. Jurnal Pengabdian Masyarakat, 1(1), 42–48.
Kader, A. A. (1992). Postharvest technology of horticultural crops. Division of Agriculture and Natural Resources, University of California.
Kader, A. A. (1995). Controlled atmospheres for storage and transport of perishable agricultural commodities. Short Report, North Carolina State University.
Khatir, R., Ratna, & Puri, M. A. (2015). Pendugaan umur simpan jagung manis berdasarkan kandungan total padatan terlarut dengan model Arrhenius. Jurnal Agritech, 35(2), 200. https://doi.org/10.22146/agritech.13831
Muchtadi, D. (1992). Petunjuk laboratorium fisiologi pascapanen sayuran dan buah-buahan. Direktorat Jenderal Pendidikan Tinggi, Departemen Pendidikan dan Kebudayaan, Institut Pertanian Bogor.
Phan, C. (1987). Effect on metabolism. Dalam J. Weichmann (Ed.), Postharvest physiology of vegetables. Marcel Dekker, Inc.
Pudja, I. A. R. P. (2009). Laju respirasi dan susut bobot buah salak Bali segar pada pengemasan plastik polyethylene selama penyimpanan dalam atmosfer termodifikasi. Agrotekno, 15(1), 8–11.
Pudja, I. A. R. P., Widia, I. W., & Gunadnya, I. B. P. G. (2014). Pengembangan teknologi rantai pendinginan sederhana untuk mempertahankan mutu sayuran dataran tinggi di Bali selama pendistribusiannya.
Sedani, N. W. (2014). Pengaruh jenis dan ketebalan plastik terhadap laju perubahan konsentrasi O₂ selama penyimpanan jagung manis (Zea mays var. saccharata Sturt). Jurnal Biosistem dan Teknik Pertanian, 1(4), 1–10.
Sumoprastowo, R. M. (2004). Memilih dan menyimpan sayur-mayur, buah-buahan, dan bahan makanan. Bumi Aksara, Jakarta.
Winarno, F. G., & Betty, S. (1982). Kerusakan bahan pangan dan cara pencegahannya. Ghalia Indonesia, Bogor.
Winarno, F. G. (1997). Kimia pangan dan gizi. PT Gramedia Pustaka Utama.
Downloads
Published
How to Cite
Issue
Section
License

This work is licensed under a Creative Commons Attribution 4.0 International License.
License Term
All articles published in Jurnal Beta (Biosistem dan Teknik Pertanian) are open access and licensed under the Creative Commons Attribution 4.0 International License (CC BY 4.0). This means that anyone is free to:
-
Share — copy and redistribute the material in any medium or format.
-
Adapt — remix, transform, and build upon the material for any purpose, even commercially.
However, this is granted under the following conditions:
-
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
-
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
By submitting an article to Jurnal Beta (Biosistem dan Teknik Pertanian), authors agree to the publication of their work under this open access license. The authors retain the copyright of their work, but grant Jurnal Beta (Biosistem dan Teknik Pertanian) the right of first publication.
For more information about the CC BY 4.0 license, please visit the official website: https://creativecommons.org/licenses/by/4.0/