The effect of variations in the number of packaging perforations on the quality of potato consumption (Solanum tuberosum L)

Authors

  • Kadek Mahendra Adhi Guna
  • Ida Ayu Rina Pratiwi Pudja
  • Yohanes Setiyo

DOI:

https://doi.org/10.24843/JBETA.2024.v12.i02.p14

Keywords:

oksigen, potato quality,, perforation, emperature

Abstract

The high production of potatoes in Indonesia is not balanced with proper post - harvest handling, so many potatoes are damaged during storage. Packaging with perforations can maintain the shelf life of potato tubers. The aim of this research is to determine the effect of packaging perforation on the quality of consumption potatoes during storage and determine treatments that can maintain the quality of consumption potatoes during storage. Research with a completely randomized design (CRD) with packaging perfo ration treatment (0.42%, 0.63%, and 0.84%). Each experimental unit was repeated 3 times. The parameters measured were weight loss, air humidity, air temperature, color difference, and texture of potato tubers. The rate of increase in weight loss for the co ntrol treatment, packaging without perforation, 0.42% perforated packaging, 0.36% perforated packaging, and 0.84% perforated packaging were respectively: 0.09 g/day, 0.025 g/day, 0.036 g/day, 0.051 g/day, 0.058 g/day. The rate of change in air humidity for each treatment was: 0.10%, 0.36%, 0.30%, 0.23%, 0.16%, and the rate of change in packaging temperature was: 0.03 o C/day, 0.056 o C/day, 0.020 o C/day, 0.026 o C/day and 0.033 o C/day. The color difference change rates for each treatment were: 0.24/day, 0.36/day, 0 .26/day, 0.27/day, and 0.23/day. The rates of change in texture of each treatment were: 0.13 /day, and 0.53 N/day, 0.65 N/day, 0.53 N/day, 0.56 N/day and 0.63 N /day. Oxygen adequacy is a parameter determining the quality of stored potato tubers, so the be st treatment is 0,84% perforated packaging with a weight loss value of 8,77%, humidity 69.8%, temperature change 28.8 o C, color difference 6.95, texture 63,4 N

References

Alhassan, N., & Abdul-rahaman, A. (2014). Technology and application of edible coatings for reduction of losses and extension of shelf life of cantaloupe melon fruits. International Journal of Scientific and Technology Research, 3(11), 7–12.

Andriyanto, F., Setiawan, B., Dina Riana, F., & Sosial Ekonomi Fakultas Pertanian Universitas Brawijaya Jl Veteran Malang, J. (2013). Dampak Impor Kentang Terhadap Pasar Kentang di Indonesia Impact Of Imported Potatoes For Indonesian Market. 1.

Anggraini, R., & Permatasari, N. D. (2018). Pengaruh Lubang Perforasi Dan Jenis Plastik Kemasan Terhadap Kualitas Sawi Hijau (Brassica Juncea L.). Jurnal Penelitian Pascapanen Pertanian, 14(3), 154. https://doi.org/10.21082/jpasca.v14n3.2017.154-162

Asgar, A. (2017). Pengaruh Suhu Penyimpanan dan Jumlah Perforasi Kemasan Terhadap Karakteristik Fisik dan Kimia Brokoli (Brassica oleracea var. Royal G) Fresh-Cut.

Astuti, N., & Nurul Fuadi, dan. (2019). Pengaruh Waktu Penyimpanan Terhadap Nilai Suhu, Kelembaban Dan Kesegaran Sayuran Pada Kemasan Daun Pisang (Vol. 6, Issue 2).

Babarinsa, F. A., & Williams, J. O. (2015). Development of a Diffuse Light Store for “Seed” Potato Storage. In International Journal of Agriculture and Earth Science(Vol. 1, Issue 8). www.iiardonline.org

Bianchi, G., Scalzo, R. Lo, Testoni, A., & Maestrelli, A. (2014). Nondestructive Analysis to Monitor Potato Quality during Cold Storage. Journal of Food Quality, 37(1), 9–17. https://doi.org/10.1111/jfq.12068

BPS. (2020). Statistik Hortikultura 2020. Badan Pusat Statistik, 88, 23–26.

Fransisca, A. (2019). Pengaruh Suhu Dan Jumlah Perforasi Pada Kemasan Terhadap Susut Bobot Kangkung. Jurnal Ilmu Pangan Dan Hasil Pertanian, 3(1), 31–41. https://doi.org/10.26877/jiphp.v3i1.3452.

Gallagher, M. J. S., dan Mahajan, P. V. 2011. The Stability and Shelf Life of Fruit and Vegetables. In Food andBeverage Stability and Shelf Life(Issue March).Woodhead Publishing Limited. https://doi.org/10.1533/9780857092540.3.641

Martin, K., Van, I., & Scholte, K. (1992). Shortening dormancy of seed potatoes by storage temperature regimes. In Potato Research(Vol. 35).

Prastya, O. A., I. M. S. Utama dan N. L. Yulianti. 2015. Pengaruh pelapisan emulsi minyak wijen dan minyak sereh terhadap mutu dan masa simpan buah tomat (Lycopersicon esculentum Mill). Jurnal BETA. 3(1): 1-10.

Proulx, E., Yagiz, Y., Nunes, M. C. N., & Emond, J.-P. (2010). Quality Attributes Limiting Snap Bean(Phaseolus vulgarisL.) PostharvestLife at Chilling and Non-chillingTemperatures. Hort Science, 45(8), 1238–1249.

Purnomo, E., Suedy, S. W. A., & Haryanti, S. (2014). Perubahan Morfologi Umbi Kentang Konsumsi (Solanum Tuberosum L. Var Granola) Setelah Perakuan Cara dan Waktu Penyimpanan Yang Berbeda. Jurnal Biologi Universitas Diponegoro, 3(1), 40–48.

Rhim, J. W., Wu, Y., Weller, C. L., & Schnepf, M. (1999). Physical Characteristics of a Composite Film of Soy Protein Isolate and Propyleneglycol Alginate. In JOURNAL OF FOOD SCIENCE(Vol. 64, Issue 1).

Setiawan, R. (2019). Efek Suhu Dingin Dan Kelembapan Tinggi Terkontrol Serta Perendam An Dengan Sodium Bikarbonat Dan Pengemas Pp Terhadap Sifat Fisik Cabai Merah Besar(Capsicum Annum L.).

Setiyo, Yohanes., Susrusa, ketut budi, Gunam, I., Gunadnya, I. B. P., Yulianti, N. luh, & Ada, W. (2017). Agribisnis Kentang. Udayana University Press.

Setiyo, Y., Permana, D. G. M., Triani, I. L., & Gunadnya, I. (2017). Quality of Potato Seeds from Some Models of Cultivation After Storage.

Techavises, N., & Hikida, Y. (2008). Development of a mathematical model for simulating gas and water vapor exchanges in modified atmosphere packaging with macroscopic perforations. Journal of Food Engineering, 85(1), 94–104. https://doi.org/10.1016/j.jfoodeng.2007.07.014

Published

2026-02-03

How to Cite

Adhi Guna, K. M., Pudja, I. A. R. P., & Setiyo, Y. (2026). The effect of variations in the number of packaging perforations on the quality of potato consumption (Solanum tuberosum L). Jurnal BETA (Biosistem Dan Teknik Pertanian), 12(2), 1–10. https://doi.org/10.24843/JBETA.2024.v12.i02.p14

Issue

Section

Articles

Most read articles by the same author(s)

<< < 1 2 3 4 5 6 7 > >>