Heat Transfer Behavior That Happen on Various Packaging of Consumed Potatoes (Solanum tuberosum L.) during Storage of Room Temperature

Authors

  • Ni Putu Budisetiari Program Studi Teknik Pertanian, Fakultas Teknologi Pertanian Universitas Udayana, Badung, Bali, Indonesia
  • Ida Ayu Rina Pratiwi Pudja Program Studi Teknik Pertanian, Fakultas Teknologi Pertanian Universitas Udayana, Badung, Bali, Indonesia
  • Ida Bagus Putu Gunadnya Program Studi Teknik Pertanian, Fakultas Teknologi Pertanian Universitas Udayana, Badung, Bali, Indonesia

DOI:

https://doi.org/10.24843/JBETA.2023.v11.i02.p19

Keywords:

heat transfer, potato, storage time

Abstract

This research was conducted to determine heat transfer, quality changes, and to find out the best results when storing potatoes at room temperature with different packaging. This study used a randomized block design (RAK) with 2 factors: storage time (5 days, 10 days, and 15 days) and packaging (cardboard, wood, and styrofoam). The packaging used is 20 cm x 15 cm x 15 cm. Measurements of heat transfer, temperature, and humidity will be carried out every 8 hours. Other parameter measurements such as moisture content, weight loss, color, and texture will be tested every 5 days. The results of the study showed that the higher the day the heat transfer reached 34.90 with the type of wooden kotak packaging, while for the observation of the temperature parameter the highest value reached 28.90 ºC on the Styrofoam packaging type, for the humidity parameter the highest value reached
92, 58% in the type of cardboard kotak packaging, the highest water content occurred in the cardboard kotak packaging with a moisture content value of 88.01%, the highest weight loss occurred in the type of wooden packaging 3.81%, the color of potatoes with the highest value occurred in the Styrofoam packaging type with a value of color 47.79 and the highest texture occurred in the packaging 68.45 gf, from these results the packaging that is able to maintain the quality of potatoes well is the type of wooden
kotak packaging.

References

Asgar, A., & Rahayu, S. (2014). Pengaruh Suhu Penyimpanan dan Waktu Pengkondisian Untuk Mempertahankan Kualitas Kentang Kultivar Margahayu. Balai Penelitian Tanaman Sayuran, 09(12), 8.

Astuti, N. (2019). Pengaruh Waktu Penyimpanan Terhadap Nilai Suhu Kelembaban dan Kesegaran Sayuran Pada Kemasan Daun Pisang [Universitas Islam Negeri Alauddin Makasar]. https://doi.org/60400115038

Ela, E., & Rochmawati, R. (2016). Faktor-faktor yang mempengaruhi penggunaan wadah styrofoam sebagai kemasan makanan pada penjual makanan jajanan di kota pontianak tahun. JUMANTIK: Jurnal Ilmiah Penelitian Kesehatan, 1–10. http://openjurnal.unmuhpnk.ac.id/index.php/JJUM/article/view/352

Engelen, A. (2018). Analisis Kekerasan, Kadar Air, Warna dan Sifat Sensori pada Pembuatan Keripik Daun Kelor. Journal of Agritech Science, 2(1), 10–15.

Hadi, I. K. P. H., Pudja, I. A. R. P., & Arda, G. (2019). Pengaruh Ketebalan Plastik Polietilen Densitas Rendah Sebagai Bahan Pengemas terhadap Mutu Daun Seledri (Apium gravelens L.) Selama Penyimpanan Dingin. Jurnal BETA (Biosistem Dan Teknik Pertanian), 8(2), 240. https://doi.org/10.24843/jbeta.2020.v08.i02.p07

Haryanti, D. N., & Hidajati, N. (2013). Pengaruh Metode Pengeringan Terhadap Kualitas Tepung Cacing Sutra (Tubifex sp.). In UNESA Journal of Chemistry (Vol. 2, Issue 3). Metadata, citation and similar papers at core.ac.uk

Ibarz, A., & Barbosa-Canovas, G. V. (2020). Thermal Properties of Food. Unit Operations in Food Engineering, 1986, 335–346. https://doi.org/10.1201/9781420012620-14

Komar, N., Rakhmadiono, S., & Kurnia, L. (2001). Teknik Penyimpanan Bawang Merah Pasca Panen. Jurnal Teknologi Pertanian, 2(2), 79–95.

Kusumiyati, Nurjanah, R., & Sutari, W. (2017). Pengaruh Suhu dan Lama Penyimpanan terhadap Kualitas Kentang Olahan (Solanum tuberosum L.) Kultivar Atlantik. Jurnal Ilmu Pangan Dan Hasil Pertanian, 1(2), 1–12. https://doi.org/10.26877/jiphp.v1i2.1678

Mulyono. (2015). Analisa Perpindahan Panas konveksi pada Kotak Rongga Vakum untuk Menyimpan Ikan. Simposium Nasional Teknologi Terapan, 3.

Mursadin, A., & Subagyo, R. (2016). Bahan Ajar Perpindahan Panas (No. 453; 1).

Pudja, I. A. R. P. P. (2015). Aplikasi Model Perpidahan Panas dan Serapan Air Pada kentang Selama Perebusan.

Rahmi, F., Zulfahrizal, Z., & Siregar, K. (2017). Analisis Pindah Panas pada Ruang Fermentasi Biji Kakao (Theobroma cacao L) dengan Menggunakan Kotak Kayu dan Styrofoam. Rona Teknik Pertanian, 10(1), 34–45. https://doi.org/10.17969/rtp.v10i1.7448

Rochayat, Y., & Munika, V. R. (2015). Respon kualitas dan ketahanan simpan cabai merah (Capsicum annuum L.) dengan penggunaan jenis bahan pengemas dan tingkat kematangan buah. Kultivasi, 14(1), 65–72. https://doi.org/10.24198/kultivasi.v14i1.12093

Saputra, D. I. (2019). Analisa perpindahan panas kotak pemanas dan pendingin yang menggunakan modul termoelektrik sebagai sumber kalor. Jurnal Sains Dan Teknologi, 18(1), 32–37.

Shaliha, L. A., Budi, S. B. M., & Hintono, A. (2017). Aktivitas Antioksidan, Tekstur dan Kecerahan Ubi Jalar Ungu (Ipomoea batatas). Jurnal Aplikasi Teknologi Pangan, 6(4), 141–144.

Siata, D. Z. S., Setyo, Y., & Arthawan, I. G. K. A. (2022). Unjuk kinerja Sistem Aerasi Dalam Kotak Penyimpanan Kentang (Solanum tuberrosum L) Tipe Kotak. Jurnal Ilmiah Teknologi Pertanian Agrotechno, 5(1), 1–8. https://ojs.unud.ac.id/index.php/agrotechno/article/download/58579/34385

Solin, H. (2013). Pertumbuhan Dan Hasil Kacang Tanah (Arachis Hypogaea L.) Pada Jarak Tanam Dan Dosis Pupuk Kandang Ayam Yang Berbeda [Universitas Islam Negeri Sultan Syarif Kasim Riau Pekanbaru]. http://kim.ung.ac.id

Toledo, R. T. (2019). Fundamentals of Food Process Engineering (S. S. and B. Media (ed.); University). Aspen Publishers.

Downloads

Published

2023-09-30 — Updated on 2026-02-11

Versions

How to Cite

Budisetiari, N. P., Pudja, I. A. R. P., & Gunadnya, I. B. P. (2026). Heat Transfer Behavior That Happen on Various Packaging of Consumed Potatoes (Solanum tuberosum L.) during Storage of Room Temperature . Jurnal BETA (Biosistem Dan Teknik Pertanian), 11(2), 411–418. https://doi.org/10.24843/JBETA.2023.v11.i02.p19 (Original work published September 30, 2023)

Issue

Vol. 11 No. 2 (2023): September

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

License Term

All articles published in Jurnal Beta (Biosistem dan Teknik Pertanian)  are open access and licensed under the Creative Commons Attribution 4.0 International License (CC BY 4.0). This means that anyone is free to:

  • Share — copy and redistribute the material in any medium or format.

  • Adapt — remix, transform, and build upon the material for any purpose, even commercially.

However, this is granted under the following conditions:

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

By submitting an article to Jurnal Beta (Biosistem dan Teknik Pertanian), authors agree to the publication of their work under this open access license. The authors retain the copyright of their work, but grant Jurnal Beta (Biosistem dan Teknik Pertanian)  the right of first publication.

For more information about the CC BY 4.0 license, please visit the official website: https://creativecommons.org/licenses/by/4.0/

Most read articles by the same author(s)

<< < 2 3 4 5 6 7