Study of Milling Rice Quality from Various Power Sizes of Grinding Machines
DOI:
https://doi.org/10.24843/JBETA.2020.v08.i01.p16Keywords:
polished rice, grinding machine, head rice, rice hullAbstract
Rice is a staple food for the people of Indonesia. Even though Indonesia is an agrarian country, Indonesia currently imports rice. In producing rice from rice there are obstacles. One of the main obstacles is post-harvest handling of rice with high yield loss during post-harvest. The amount of post-harvest loss occursbecause most farmers still use traditional method or the handling is not good and right. The purpose of this study was to determine the relationship between the capacity of the grinding machine and the quality of sosoh rice produced by the mill and to know the quality comparison of various types of grinding machine capacity. The research was carried out in the area of Wanasari Village, Tabanan - Bali to find out the quality of sosoh rice in the region. Head Rice is broken rice grains, both healthy and defective, which have a size greater than or equal to 6/10 part of the average length size of whole rice grains that can pass through the surface of the indented plate basin with a requirement of 4.2 mm hole size. Rice hull is a protective cover from rice grains which is separated from seeds during the grinding process. In the grinding process, there is rice which remains the husk which is caused by the power / rpm of the grinding machine which is too low because the friction force produced by the engine is not sufficient for the overall release of rice hullReferences
Anonim, 1983. aryaagh.wordpress.comBiro Pusat Statistik (BPS), 2013. Survei susut pascapanen MT. 2012/2013 Kerjasama BPS, Ditjen Tanaman Pangan, Badan Pengendali Bimas, Bulog, Bappenas, IPB, dan Badan Litbang Pertanian
Budijanto, Slamet, and Azis Boing Sitanggang. "Produktivitas dan proses penggilingan padi terkait dengan pengendalian faktor mutu berasnya."Jurnal Pangan20.2 (2011): 141-152.
Hasbullah, R., dan A.R. Dewi. 2009. Kajian Pengaruh Konfigurasi Mesin Penggilingan terhadap Rendemen dan Susut Giling beberapa Varietas Padi. Jurnal TeknikPertanian. IPB. Vol. 23 No. 2.
Iswari, Kasma. "Kesiapan teknologi panen dan pascapanen padi dalam menekan kehilangan hasil dan meningkatkan mutu beras."Jurnal Penelitian dan Pengembangan Pertanian31.2 (2013).Jaya, Small Milling Performances in Lempuing, and District Dry Land. "Kinerja Penggilingan padi kecil di lahan kering Kecamatan Lempuing." (2014).
Katsuragi. Y (1995) Rice milling machine. Rice Post. Harvest Technology. The Food Agency, Ministry of Agriculture, Forestry and Fisheries. Japan pp. 351-362
Raharjo, Budi, Dedeh Hadiyanti, and Kgs A. Kodir. "Kajian Kehilangan Hasil Pada Pengeringan dan Penggilingan Padi di Lahan Pasang Surut Sumatera Selatan."Jurnal Lahan Suboptimal: Journal of Suboptimal Lands1.1 (2012).
Nugraha, Sigit 2012. Inovasi Teknologi Pascapanen Untuk Mengurangi Susut Hasil Dan Mempertahankan Mutu Gabah/Beras Di Tingkat Petani. Buletin TeknologiPascananen Pertanian Vol 8 (1)
Sartika, Novi Dewi, and Zuhriyah Ramdhani. "Kajian Penggunaan Mesin Penggiling Mobile Terhadap Mutu Beras Untuk Beberapa Varietas Padi Di Kabupaten Sumbawa Barat (Study on Mobile Milling Machine Utilization in Rice Quality of Several Paddy Variety at Sumbawa Barat Regency)."Jurnal Ilmiah Rekayasa Pertanian dan Biosistem6.1 (2018): 53-59.SNI, 2013. Standar Mutu Beras.
Suantari, Ni Made Ayu Manik, I. GN Apriadi Aviantara, and IA Rina Protiwi Pudja. "Analisis Kinerja Sistem Penggilingan Gabah Sebagai Penunjang Usaha Pertanian Berkelanjutan (Studi Kasus di Kecamatan Penebel, Kabupaten Tabanan)."Jurnal BETA (Biosistem dan Teknik Pertanian)6.2: 112-119.
Susrusa, K.B., Y. Setiyo, Ni Luh Yulianti, dan Putu Udayani. Kajian Kelayakan Teknis dan Ekonomis Pada Proses Pengilingan Padi Untuk Menghasilkan Beras Sosoh Berkualitas. Prosiding Seminar Nasional Sains dan Teknologi Universitas Udayana.
Umar, S. 2003. Pengaruh Sistim Penggilingan Padi terhadap Kualitas Giling di Sentra Produksi Beras Lahan Pasang Surut. Universitas Mulawarman. Samarinda.Waries, A. 2006. Teknologi Penggilingan Padi. PT Gramedia Pustaka Utama. Jakarta.
Warisno, Wowon, and Budianto Lanya Tamrin. "ANALISIS MUTU BERAS PADA MESIN PENGGILINGAN PADI BERJALAN DI KABUPATEN PRINGSEWU THE ANALYSIS OF RICE QUALITY PRODUCED BY COMMUTING RICE MILLING MACHINE IN PRINGSEWU DISTRICT.
"Widowati, Sri. "Pemanfaatanhasil samping penggilingan padi dalam menunjang sistem agroindustri di pedesaan."Buletin Agrobio4.1 (2001): 33-38.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
License Term
All articles published in Jurnal Beta (Biosistem dan Teknik Pertanian) are open access and licensed under the Creative Commons Attribution 4.0 International License (CC BY 4.0). This means that anyone is free to:
-
Share — copy and redistribute the material in any medium or format.
-
Adapt — remix, transform, and build upon the material for any purpose, even commercially.
However, this is granted under the following conditions:
-
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
-
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
By submitting an article to Jurnal Beta (Biosistem dan Teknik Pertanian), authors agree to the publication of their work under this open access license. The authors retain the copyright of their work, but grant Jurnal Beta (Biosistem dan Teknik Pertanian) the right of first publication.
For more information about the CC BY 4.0 license, please visit the official website: https://creativecommons.org/licenses/by/4.0/
