The Effect of Thickness of Low-Density Polyethylene Plastic as a Packaging Materials on the Quality of Parsley (Petroselinum crispum L.) during Cold Storage

Authors

  • Bob Evan Tampubolon Program Studi Teknik Pertanian, Fakultas Teknologi Pertanian, Universitas Udayana. Kampus Bukit Jimbaran, Badung-Bali
  • Ida Ayu Rina Pratiwi Pudja Program Studi Teknik Pertanian, Fakultas Teknologi Pertanian, Universitas Udayana. Kampus Bukit Jimbaran, Badung-Bali
  • Ida Bagus Putu Gunadnya Program Studi Teknik Pertanian, Fakultas Teknologi Pertanian, Universitas Udayana. Kampus Bukit Jimbaran, Badung-Bali

DOI:

https://doi.org/10.24843/JBETA.2022.v10.i01.p22

Keywords:

parsley, LDPE plastic thickness, cold storage, regression of product quality

Abstract

This research was aimed to determinethe effect of Low-density polyethylene as packaging material for the quality of parsley (Petroselinum crispum L.) during cold room. Additionally, this study was to determinethe thickness of the low-density polyethyleneplastic which can retain the grade of parsley for a longer time. The design experiment used in this study was a Completely Randomized Design (CRD) method using one treatment factor, namely the treatment of low-density polyethylene plastic thickness (LDPE)with a thickness of 0.02 mm; 0.03 mm; 0.04 mm; 0.05 mm; and a thickness of 0.06 mm. This research was replicated3 times in order to obtain 18 units of experimental results. The parameters observed include: weight loss, characteristics, color test, damagerate and respiration rate. The results of this research signified that the thickness of low-density plastic (LDPE) gave a very significant effect on characteristics, color test, damage rate, respiration rate and weight loss. The best handling was obtainedby use of LDPE plastic with a thickness of 0.05 mm with a weight loss of 13.88%, color of 13.93, 43.81 mg CO2/kg/hour for respiration rate, characteristic scoring test value of 3.73, and 3.87 for damage level. Low-density polyethylene plastic with a thickness of 0.05 mm can retain the quality of parsley better than other thicknesses during shelf life of 12 days at 8°C ± 2°C.

References

Agustiningrum, D. A., Susilo, B., dan Yulianingsih, R. (2014). Studi pengaruh konsentrasi oksigen pada penyimpanan atmosfer termodifikasi buah sawo (Achras zapota L.). Jurnal Bioproses Komoditas Tropis.

Astuti, B. C., dan Syamhudi. (2014). Pengaruh variasi garam terhadap komposisi kimia dan aktivitas antioksidan kubis putih (Brassica oleracea) fermentasi. Journal of Chemical Information and Modeling.

Budiyanto, M. P. (2012). Pengaruh jenis kemasan dan kondisi penyimpanan terhadap mutu dan umur simpan produk keju lunak rendah lemak (hlm. 1–75).

Darmajana, D. A., Afifah, N., Solihah, E., dan Indriyanti, N. (2018). Pengaruh pelapis dapat dimakan dari karagenan terhadap mutu melon potong dalam penyimpanan dingin. Agritech. https://doi.org/10.22146/agritech.10377

Widianty, E., Gozali, T., dan Nurminabari, I. S. (2015). Pengaruh jenis kemasan dan jumlah perforasi kemasan terhadap karakteristik jamur champignon (Agaricus bisporus) yang disimpan pada suhu rendah. Teknologi Pangan.

Hadi, I. H., Pudja, I. A. P., dan Arda, G. (2019). Pengaruh ketebalan plastik polietilen densitas rendah sebagai bahan pengemas terhadap mutu daun seledri (Apium graveolens L.) selama penyimpanan dingin. https://doi.org/10.24843/Jbeta.2020.V08.I02.P07

Hatton, T. T., dan Pantastico, E. B. (1968). Persyaratan masing-masing komoditi. Dalam Fisiologi pasca panen, penanganan dan pemanfaatan buah-buahan dan sayuran tropika dan sub-tropika (Terj. Kamariyani).

Ikhsan, A. M., Tamrin, dan Kadir, M. Z. (2014). Pengaruh media simpan pasir dan biji plastik dengan pemberian air pendingin terhadap perubahan mutu buah pisang kepok (Musa normalis L.). Jurnal Teknik Pertanian Lampung.

Johansyah. (2014). Pengaruh plastik pengemas LDPE, HDPE, dan PP terhadap penundaan kematangan buah tomat (Lycopersicon esculentum Mill.). Buletin Anatomi dan Fisiologi. https://doi.org/10.14710/baf.v22i1.7808

Kusumaningrum, R., Supriadi, A., dan Hanggita, S. (2013). Karakteristik dan mutu teh bunga lotus (Nelumbo nucifera). Jurnal Teknologi Hasil Perikanan, 2(1), 9–21.

Martini, N. K. S., Utama, I. M. S., dan Pudja, I. A. P. (2017). Pengaruh perlakuan uap etanol terhadap mutu dan masa simpan bunga kol (Brassica oleracea var. botrytis) pada suhu ruang. Jurnal Beta (Biosistem dan Teknik Pertanian), 5.

McGee, H. (2007). On food and cooking. Scribner.

Muchtadi, D. (1989). Petunjuk laboratorium evaluasi nilai gizi pangan. PAU Pangan dan Gizi IPB.

Rahmawati dan Maulida. (2010). Pengemasan pada buah sebagai upaya memperpanjang umur simpan dan kajian sifat fisiknya selama penyimpanan. Teknologi Pertanian, 6(2), 45–49.

Rohaeti, E., R., S., dan Hasbullah, R. (2014). Perlakuan uap panas (vapor heat treatment) untuk disinfestasi lalat buah dan mempertahankan mutu buah belimbing (Averrhoa carambola L.). Jurnal Keteknikan Pertanian.

Saragih, H., Dharma, I., dan Astawa, I. (2016). Pengaruh ketebalan plastik polyethylene densitas rendah terhadap umur simpan bawang daun (Allium fistulosum L.). E-Jurnal Agroekoteknologi Tropika.

Sugiarto, H. P., dan I. S. (2008). Departemen Teknologi Industri Pertanian dan Departemen Teknik Pertanian, Fakultas Teknologi Pertanian IPB. 15(1), 79–84.

Topuz, A., Torun, M., Tontul, I., Nadeem, A., Haznedar, F., dan Özdemir. (2014). Physicochemical properties of Turkish green tea powder: Effects of shooting period, shading, and clone. Journal of Agriculture and Forestry, 38, 233–241.

Warisno dan Dahana, K. (2007). Budidaya rambutan. CV Aneka Ilmu.

Wills, R., McGlasson, B., Graham, D., dan Joyce, D. (1991). Postharvest: An introduction to the physiology and handling of fruit and vegetables. Choice Reviews Online. https://doi.org/10.5860/choice.28-2733

Winarno, F. G. (1984). Kimia pangan dan gizi. PT Gramedia.

Yanti, H., Elfawati, dan Hidayati. (2008). Kualitas daging sapi dengan kemasan plastik PE dan PP. Jurnal Peternakan.

Downloads

Published

2022-04-29

How to Cite

Tampubolon , B. E., Pudja, I. A. R. P., & Gunadnya, I. B. P. (2022). The Effect of Thickness of Low-Density Polyethylene Plastic as a Packaging Materials on the Quality of Parsley (Petroselinum crispum L.) during Cold Storage . Jurnal BETA (Biosistem Dan Teknik Pertanian), 10(1), 103–110. https://doi.org/10.24843/JBETA.2022.v10.i01.p22

Issue

Vol. 10 No. 1 (2022): April

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

License Term

All articles published in Jurnal Beta (Biosistem dan Teknik Pertanian)  are open access and licensed under the Creative Commons Attribution 4.0 International License (CC BY 4.0). This means that anyone is free to:

  • Share — copy and redistribute the material in any medium or format.

  • Adapt — remix, transform, and build upon the material for any purpose, even commercially.

However, this is granted under the following conditions:

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

By submitting an article to Jurnal Beta (Biosistem dan Teknik Pertanian), authors agree to the publication of their work under this open access license. The authors retain the copyright of their work, but grant Jurnal Beta (Biosistem dan Teknik Pertanian)  the right of first publication.

For more information about the CC BY 4.0 license, please visit the official website: https://creativecommons.org/licenses/by/4.0/

Most read articles by the same author(s)

1 2 3 4 5 6 7 > >>