Performanc of Cooler Box Using TEC1-12715 On Various Cooling
DOI:
https://doi.org/10.24843/JBETA.2023.v11.i01.p04%20Keywords:
cooler box, cooling load, COP, thermoelectricAbstract
A cooler box is a device used to store and keep ingredients cool and fresh. One of the efforts to develop a cooling source for made cooler boxes is to use a thermoelectric module TEC1-12715 that utilizes the Peltier effect. This study aims to determine the temperature reached in the cooler using TEC1- 12715 as a cooling device. The cooler box load without and with a cooling load (bottles filled with water with a volume of 600 ml each). The cooling load data and the coefficient of performance (COP) are displayed in a graph of observations every 6 minutes. All the analyzed data showed in the pictures and tables. The results showed that the cooler box temperature without load decreased by the increasing cooling time. The average temperature achieved was 17.08°C. The average water temperature in the cooler containing 2, 4, and 6 bottles of aqua was 21.56°C, 23.08°C, and 24.74°C, respectively. An increase in cooling load will increase the input power into the cooler box and lower the COP value of the cooling system
References
Anwar, K. 2010. Efek beban pendingin terhadap performa sistem mesin pendingin. J. Smartek. 8(3): 203-214.
Ashari, Y., Widjonarko dan B. Rudiyanto. 2020. Rancang bangun cool case portabel menggunakan modul TEC1-12710. NCIET 1:B99-B110.
Aziz, A., R.I. Mainil, A.K. Mainil, Syafri dan M.F. Syukrillah. 2017. Design of portable beverage cooler using one stage
thermoelectric cooler (TEC) module. Aceh Int. J. Technol. 7(1):29-36.
Delly, J., M. Hasbi, dan I.F. Alkhoiron. 2016. Studi penggunaan modul thermoelektrik sebagai sistem pendingin portable. ENTHALPHY 1(1): 50-55.
Gultom, N.R., R.I. Mainil dan A. Aziz. 2016. Pengujian mesin pendingin minuman protable kapasitas 4,7 liter dengan modul termoelektris menggunakan aluminium dan tanpa aluminium. Jom Fteknik 3(2):1-4.
Irwanda, F.A. dan A. Martin. 2019. Perancangan dan pembuatan blood cool box menggunakan termoelectric peltier pada beban pendingin 1 liter. Jom FTEKNIK 6(2): 1-5.
Mainil, A.K., A. Aziz dan M. Akmal. 2018. Portable thermoelectric cooler box performance with variation of input power and cooling load. Aceh Int. J. Technol. 7(2):85-92.
Mainil, R.I., A. Aziz, dan A. Kurniawan. 2015. Penggunaan modul thermoelectric sebagai elemen pendingin box cooler. Seminar Nasional XIV, Bandung: 1-2 Desember 2015. Hal. 44-49.
Mirmanto, M., I.B. Alit, dan Y. Anggani. 2019. Unjuk kerja kotakpendingin peltier dengan unit pembuang panas heat sink fin-fan dan single fan heat pipe. Rekayasa Mesin 10(1):1-8.
Mirmanto, R. Sutanto dan D.K. Putra. 2018. Unjuk kerja kotak pendingin termoelektrik dengan variasi laju aliran massa air pendingin. J. Teknik Mesin. 7(1):44-49.
Rizal, M., N. Ilminnafik, dan D. Listyadi. 2013. Pengaruh beban pendingin terhadap prestasi kerja mesin pendingin dengan refrigerant R12 dan LPG. Jurnal Rotor 6(1).
Safitra, A.G. dan A.B.K. Putra. 2013. Studi variasi beban pendinginan di evaporator low stage sistem refrigerasi cascade menggunakan heat exchanger tipe concentric tube dengan fluida kerja refrigeran musicool-22 di high stage dan r-404a di low stage. Jurnal Teknik POMITS 2(1): B95-B100.
Setyawan, D.L., E. Widodo dan R. Hasby. 2016. Analisis variasi media pendingin kondensor terhadap rasio pelepasan kalor dan coefisien of performance (cop) pada mesin pendingin. Jurnal Rotor 2: 18-22.
Syahrizal, I., S. Panjaitan dan Yandri. 2013. Analisis konsumsi energi listrik pada sistem pengkondisian udara berdasarkan variasi kondisi ruangan (studi kasus di politeknik terpikat sambas). Jurnal Elkha 5(1): 14-20.
Syukrillah, M.F., R.I. Mainil, dan A. Aziz. 2016. Pengujian mesin pendingin minuman portable menggunakan port usb dan adaptor sebagai daya input. Jom FTEKNIK 3(2): 1-5.
Downloads
Published
How to Cite
Issue
Section
License

This work is licensed under a Creative Commons Attribution 4.0 International License.
License Term
All articles published in Jurnal Beta (Biosistem dan Teknik Pertanian) are open access and licensed under the Creative Commons Attribution 4.0 International License (CC BY 4.0). This means that anyone is free to:
-
Share — copy and redistribute the material in any medium or format.
-
Adapt — remix, transform, and build upon the material for any purpose, even commercially.
However, this is granted under the following conditions:
-
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
-
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
By submitting an article to Jurnal Beta (Biosistem dan Teknik Pertanian), authors agree to the publication of their work under this open access license. The authors retain the copyright of their work, but grant Jurnal Beta (Biosistem dan Teknik Pertanian) the right of first publication.
For more information about the CC BY 4.0 license, please visit the official website: https://creativecommons.org/licenses/by/4.0/