Characteristics of Biomass Brickets with Different Geometry Variations and Types of Raw Material

Authors

  • I Putu Dharma Putra Ritzada Program Studi Teknik Pertanian dan Biosistem, Fakultas Teknologi Pertanian, Universitas Udayana, Badung, Bali, Indonesia
  • Ni Luh Yulianti Program Studi Teknik Pertanian dan Biosistem, Fakultas Teknologi Pertanian, Universitas Udayana, Badung, Bali, Indonesia
  • Ida Bagus Putu Gunadnya Program Studi Teknik Pertanian dan Biosistem, Fakultas Teknologi Pertanian, Universitas Udayana, Badung, Bali, Indonesia

DOI:

https://doi.org/10.24843/JBETA.2021.v09.i02.p06

Keywords:

tabah bamboo, rice husk, geometric shape

Abstract

This study aims to analyze the characteristics of biomass briquettes with different geometry variations and types of biomass briquette raw materials and determine which treatment produces the best quality briquettes. This research uses block design (RAK) using 2 factorials and 3 replications. The first factor is the type of raw material (A) which consists of three levels, namely tabah bamboo (A1), rice husk (A2) and a mixture of tabah bamboo and rice husk (A3). The second factor is the geometric shape of the briquette (B) which consists of two levels, namely beams (B1) and cylinders (B2). All treatments were repeated 3 times in order to obtain 18 observational data. The data obtained were analyzed by means of variance and if there was a significant treatment effect, then it was followed by the BNT test on the average treatment. The results showed that the interaction between treatments. Types of raw materials and geometric shapes had a significant effect on the quality parameters of the resulting briquettes. The treatment of briquettes made from rice husks in a cylindrical shape (A2B2) is a treatment that produces the best quality briquettes with a moisture content value of 2.64% bb.ash content was 6.60%, combustion rate was 73.16 (gr / minute) and volatile matter was 13.86%.

References

Almu, M. A., Syahrul, S., & Padang, Y. A. (2014). Analisa Nilai Kalor Dan Laju Pembakaran Pada Briket Campuran Biji Nyamplung (Calophyllm Inophyllum) Dan Abu Sekam Padi.Dinamika Teknik Mesin, 4(2), https://doi.org/10.29303/d.v4i2.61 117–122.

Elsaprike, J., Yahya, R., & Yuwana, Y. (2018). Pembuatan Arang Dengan Metode Tungku Piloris Double Burner Menggunakan Limbah Kayu Dengan Metode Manduk Di Kecamatan Tebing Tinggi Kabupaten Empat Lawang. Naturalis: Jurnal Penelitian Pengelolaan Sumber Daya Alam Dan Lingkungan, 7(2), 33-40. https://doi.org/10.31186/naturalis.7.2.6009

Hastiawan, I., Ernawati, E., Noviyanti, A. R., Eddy, D. R., & Yuliyati, Y. B. (2018). Pembuatan briket dari limbah bambu dengan memakai. Dharmakarya: Jurnal Aplikasi Ipteks Untuk Masyarakat, 7(3), 154–156.

Hendra, D. (2007). Pembuatan Briket Arang Dari Campuran Kayu, Bambu, Sabut Kelapa Dan Tempurung Kelapa Sebagai Sumber Energi Alternatif. In Jurnal Penelitian Hasil Hutan (Vol. 25, Issue 3, pp. 242–255). https://doi.org/10.20886/jphh.2007.25.3.242255

Ihsan, (2019). Pengaruh Komposisi Terhadap Karakteristik Briket Kombinasi Arang Tempurung Kelapa Dan Arang Bambu. JFT : Jurnal Fisika Dan Terapannya, 6(1), 89. https://doi.org/10.24252/jft.v6i1.12737

Ismanto, A., & Martono, D. (2012). ( Physical Properties and Dimentional Stabilization of Several Commercial Bamboo Species ). 30(3), 163–170. Kencana, P. K. D., Widia, W., & Antara, N. S. (2012). Praktek Baik Budi Daya Bambu Rebung Tabah (Gigantochloa nigrociliata BUSE-KURZ). 169. https://bamboeindonesia.files.wordpress.com/2012/06/budidaya-bambu-rebung-tabah.pdf

Kurdiawan, Y. Z., Erlangga, M., & Juliastuti, S. R. (2013). Pemanfaatan Limbah Sekam Padi Menjadi Briket Sebagai Sumber Energi Alternatif dengan Proses Karbonisasi dan Nonkarbonisasi. ITS Chemical Engineering, 2(1), 15.

Latifa, A. (2015). Digital Repository Universitas Jember. http://repository.unej.ac.id/bitstream/handle/12

3456789/65672/Ainul Latifah101810401034.pdf?sequence=1 Lempang, M. (2016). Pengawetan Bambu Untuk

Barang Kerajinan Dan Mebel Dengan Metode Tangki Terbuka. Info Teknis EBONI, 13(Desember 2016,), http://balithutmakassar.org/wp79–92. content/uploads/2017/11/01_PengawtanBambu-TangkiTerbuka_InfotekeBoni.pdf Nadkarni, R. (2007). Guide to ASTM Test Methods for the Analysis of Petroleum Products and Lubricants, 2nd Edition. In Guide to ASTM Test Methods for the Analysis of Petroleum Products

and Lubricants, 2nd Edition. https://doi.org/10.1520/mnl44-2nd-eb

Patandung, P. (2017). Pengaruh Jumlah Tepung KanjiPada Pembuatan Briket Arang Tempurung Pala. JurnalPenelitian Teknologi Industri, 6(2), 95. https://doi.org/10.33749/jpti.v6i2.3195

Purnama, Chumaidi, A., & Saleh., A. (2012). Pemanfaatan Limbah Cair CPO Sebagai Perekat Pada Pembuatan Briket dari Arang Tandan Kosong Kelapa Sawit.18(45).

Purnomo, R. H., Hower, H., & Padya, I. R. (2015). Pemanfaatan limbah biomassa untuk briket sebagai energi alternatif. Prosiding Seminar Agroindustri Dan Lokakarya Nasional FKPTTPI, September, 2–3.

Purwanto, J., & Sofyan, S. (2014). Pengaruh Suhu dan Waktu Pengarangan Terhadap Kualitas Briket Arang dari Limbah Tempurung Kelapa Sawit. Jurnal Litbang Industri, 4(1), 29. https://doi.org/10.24960/jli.v4i1.638.29-38

Ristianingsih, Y., Ulfa, A., & Syafitri, R. (2015). Karakteristik Briket Bioarang Berbahan Baku Tandan. Jurnal Konversi, 4(2), 16–21.

Setiani, V., Setiawan, A., Dhani, M. R., & Maulidya, R. D. (2019). Analisis Proximate Briket Tempurung Kelapa dan Ampas Tebu. Jurnal Presipitasi : Media Komunikasi Dan Pengembangan Teknik Lingkungan, 16(2), 91. https://doi.org/10.14710/presipitasi.v16i2.9196

Sudding, & Jamaluddin. (2015). Pengaruh Jumlah Perekat Kanji terhadap Lama Briket Terbakar

menjadi Abu. Jurnal Chemical, 16(1), 27–36.

Suheryanto, D., Susilaning, L., Hastuti, S., Kusumanegara, J., & Yogyakarta, N. (2013). Pembuatan Arang Bambu ( Bamboo Charcoal ) Pada Suhu. 2, 51–59.

Surest, A. H., & Afif, H. (2011). Kayu Dan Tempurung Kelapa Karbonisasi. 17(8), 29–40. Dengan Proses Susanto, A., & Yanto, T. (2013). Pembuatan Briket Bioarang Dari Cangkang Dan Tandan Kosong Kelapa Sawit. Jurnal Teknologi Hasil Pertanian, 6(2). https://doi.org/10.20961/jthp.v0i0.13516

Taufik, I., & Fenni, S. (2015). Efektivitas Bentuk

Geometri Dan Berat Briket Bioarang Dari Bambu Terhadap Kualitas Penyalaan Dan Laju Pembakaran. Jurnal Teknik Kimia, 10(1), 8–12.

Downloads

Published

2021-09-29 — Updated on 2026-02-11

Versions

How to Cite

Ritzada, I. P. D. P., Yulianti, N. L., & Gunadnya, I. B. P. (2026). Characteristics of Biomass Brickets with Different Geometry Variations and Types of Raw Material. Jurnal BETA (Biosistem Dan Teknik Pertanian), 9(2), 193–201. https://doi.org/10.24843/JBETA.2021.v09.i02.p06 (Original work published September 29, 2021)

Issue

Vol. 9 No. 2 (2021): September

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

License Term

All articles published in Jurnal Beta (Biosistem dan Teknik Pertanian)  are open access and licensed under the Creative Commons Attribution 4.0 International License (CC BY 4.0). This means that anyone is free to:

  • Share — copy and redistribute the material in any medium or format.

  • Adapt — remix, transform, and build upon the material for any purpose, even commercially.

However, this is granted under the following conditions:

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

By submitting an article to Jurnal Beta (Biosistem dan Teknik Pertanian), authors agree to the publication of their work under this open access license. The authors retain the copyright of their work, but grant Jurnal Beta (Biosistem dan Teknik Pertanian)  the right of first publication.

For more information about the CC BY 4.0 license, please visit the official website: https://creativecommons.org/licenses/by/4.0/

Most read articles by the same author(s)

<< < 1 2 3 4 5 6 7 8 > >>