Characteristics of Biomass Briquettes in term of Variations in Raw Materials and Different Percentages of Adhesive

Authors

  • Agnesia Arista Wijaya AK Program Studi Teknik Pertanian dan Biosistem, Fakultas Teknologi Pertanian, Universitas Udayana, Badung, Bali.
  • Ni Luh Yulianti Program Studi Teknik Pertanian dan Biosistem, Fakultas Teknologi Pertanian, Universitas Udayana, Badung, Bali.
  • Ida Bagus Putu Gunadnya Program Studi Teknik Pertanian dan Biosistem, Fakultas Teknologi Pertanian, Universitas Udayana, Badung, Bali.

DOI:

https://doi.org/10.24843/JBETA.2021.v09.i02.p07

Keywords:

Tabah bamboo,, husk, briquette characteristics, adhesive percentage briquettes

Abstract

This study aims to determine the characteristics and effects of the types of raw materials and the percentage of different adhesives on the quality of the resulting briquettes and determine which treatment gives the best results for the characteristics of the resulting briquettes. This study used a factorial randomized block design (RBD) using 2 factors and 3 replications. The first factor (A) is the type of raw material which consists of 3 levels, namely tabah bamboo (A1), rice husk (A2) and a mixture of tabah bamboo and rice husk (A3). The second factor (B) is the percentage of adhesive which consists of 3 levels, namely the percentage of 10%, (B1) 15% (B2) and 20% (B3). The research parameters observed were moisture content, ash content, volatile substance content and combustion rate. All treatments were repeated 3 times in order to obtain 27 experimental units. The data obtained were analyzed by means of variance and if there was a significant treatment effect, it was continued with the Duncan Multiple test (DMRT). Based on the results of the study, it is known that the treatment interaction has a significant effect on the parameters of moisture content, ash content, volatile substance content and combustion rate. Furthermore, the water content obtained ranged from 2.30% wt - 4.78%, bb ash content 5.88% - 34.85%, evaporating substance content 31.30% - 51.59% and combustion rate 73.20 gr / minute - 106.00 gr / minute. The best quality of briquettes was obtained in A2B3 treatment (80 grams of rice husk 20 grams of adhesive) where the resulting moisture content was 2.30% BW, 32.29% ash content, 32.01% volatile substance content and 92.60 gr burning rate /minute.

References

Batubara, B., & Jamilatun, S. (2012). Sifat-Sifat Penyalaan dan Pembakaran Briket Biomassa, Briket Batubara dan Arang Kayu. Jurnal Rekayasa Proses,2(2), 37–40. https://doi.org/10.22146/jrekpros.554

Faiz, T. A., Harahap, L. A., & Daulay, S. B. (2015). Pemanfaatan Tongkol Jagung dan Limbah Teh Sebagai Bahan Briket. Jurnal Rekayasa Pangan Dan Pertanian, 4(3), 427–432.

Handayani, R. T., & Suryaningsih, S. (2019).Pengaruh Suhu Karbonisasi dan Variasi Kecepatan. 4(2), 98–103.

Hastiawan, I., Ernawati, E., Noviyanti, A. R., Eddy, D. R., & Yuliyati, Y. B. (2018). Pembuatan briket dari limbah bambu dengan memakai. Dharmakarya: Jurnal Aplikasi Ipteks Untuk Masyarakat, 7(3),154–156.

Hendra, D. (2007). Pembuatan Briket Arang Dari Campuran Kayu, Bambu, Sabut Kelapa Dan Tempurung Kelapa Sebagai Sumber Energi Alternatif. In Jurnal Penelitian Hasil Hutan(Vol. 25, Issue 3, pp. 242–255). https://doi.org/10.20886/jphh.2007.25.3.242-255

Isa, I. (2012). Briket Arang Dan Arang Aktif Dari Limbah Tongkol Jagung. Universitas Negeri Gorontalo, 1–50. http://repository.ung.ac.id/get/simlit/1/168/2/ Briket-Arang-Dan-Arang-Aktif-Dari-Limbah-Tongkol-Jagung.pdf

Iskandar, T., & Rofiatin, U. (2017). Karakteristik Biochar Berdasarkan Jenis Biomassa Dan Parameter Proses Pyrolisis. Jurnal Teknik Kimia, 12(1), 28–34. https://doi.org/10.33005/tekkim.v12i1.843

Ismayana, A., & Afriyanto, M. R. (2011). Pengaruh Jenis Dan Kadar Bahan Perekat Pada Pembuatan Briket Blotong Sebagai Bahan Bakar Alternatif. J. Tek. Ind. Pert,21(3), 186–193.

Kencana, P. K. D., Widia, W., & Antara, N. S. (2012). Praktek baik budi daya bambu rebung tabah(Gigantochloa nigrociliata BUSE-KURZ). 1–69. https://bamboeindonesia.files.wordpress.com/2012/06/budidaya-bambu-rebung-tabah.pdf

Muhammad, D. R. A., Parnanto, N. H. R., & Widadie, F. (2018). Kajian Peningkatan Mutu Briket Arang Tempurung Kelapa Dengan Alat Pengering Tipe Rak Berbahan Bakar Biomassa. Jurnal Teknologi Hasil Pertanian, 6(1). https://doi.org/10.20961/jthp.v0i0.13500

Musabbikhah, Saptoadi, H., Subarmono, & Arif Wibisono, M. (2015). optimasi proses pembuatan briket biomassa menggunakanmetode yang ramah lingkungan (Optimization of Biomass Briquettes Production Process Using Taguchi Method to Fulfill The Need of Environment Friendly Alternative Fuel)Diterima : 15 Desember 2014. J. Manusia Dan Lingkungan, 22(1), 121–128.

Ningsih, E., Mirzayanti, Y. W., Himawan, H. S., & Indriani, H. M. (2016). Pengaruh Jenis Perekat pada Briket dari Kulit Buah Bintaro terhadap Waktu Bakar. Prosiding Seminar Nasional Teknik Kimia “Kejuangan” Pengembangan Teknologi Kimia Untuk Pengolahan Sumber Daya Alam Indonesia, 1–8.

Purwanto, D. (2014). Pengaruh Tekanan Kempa Dan PersentasePerekat Terhadap Sifat Biobriket Dari Limbah Tempurung Sawit. Jurnal Riset Industri Hasil Hutan,7(2), 1. https://doi.org/10.24111/jrihh.v7i2.1225

Putra, H. P., & Indonesia, U. I. (2018). StudyKarakteristik Briket Berbahan Dasar Limbah Bambu dengan Menggunakan Perekat Nasi. December 2013.Sa’diyah, H., Nurhimawan, S., Fatoni, S. A., Irmansyah, I., & Irzaman, I. (2016). Ektraksi Silikon Dioksida Dari Daun Bambu. V, SNF2016-BMP-13-SNF2016-BMP-16. https://doi.org/10.21009/0305020303

Silviana, & Purbasari, A. (2009). Kajian Awal Pemanfaatan Kulit Biji Nyamplung Sebagai Briket Bioarang. Kajian Awal Pemanfaatan Kulit Biji Nyamplung Sebagai Briket Bioarang,6.Siwi, H., Sirun, A., & Arungpadang, T. A. R. (2017). Briket Campuran Arang Tempurung Kelapa dan Enceng Gondok Hasil Pirolisis. 1, 61–68.

Sudarja. (2009). Analisis Rekayasa dan Karakterisasi Briket Bahan Bakar dari Limbah Serat Kenaf. Jurnal Ilmiah Semesta Teknika, 12(1), 92–98.

Sudding, & Jamaluddin. (2015). Pengaruh Jumlah Perekat Kanji terhadap Lama Briket Terbakar menjadi Abu. Jurnal Chemical, 16(1), 27–36.

Vachlepi, A., & Suwardin, D. (2013). Penggunaan Biobriket Sebagai Bahan Bakar Alternatif Dalam Pengeringan Karet Alam. Warta Perkaretan,32(2), 65. https://doi.org/10.22302/ppk.wp.v32i2.38

Wibowo, A. S. (2009). Kajian pengaruh komposisi dan perekat pada pembuatan briket sekam padi terhadap kalor yang dihasilkan. Universitas Stuttgart.Yorgancı, B. (2018). Title. Gastrointestinal Endoscopy, 10(1), 279–288.

http://dx.doi.org/10.1053/j.gastro.2014.05.023%0Ahttps://doi.org/10.1016/j.gie.2018.04.013%0Ahttp://www.ncbi.nlm.nih.gov/pubmed/29451164%0Ahttp://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=PMC5838726%250Ahttp://dx.doi.org/10.1016/j.gie.2013.07.022

Downloads

Published

2021-09-29 — Updated on 2026-02-11

Versions

How to Cite

AK, A. A. W., Yulianti, N. L., & Gunadnya, I. B. P. (2026). Characteristics of Biomass Briquettes in term of Variations in Raw Materials and Different Percentages of Adhesive . Jurnal BETA (Biosistem Dan Teknik Pertanian), 9(2), 202–211. https://doi.org/10.24843/JBETA.2021.v09.i02.p07 (Original work published September 29, 2021)

Issue

Vol. 9 No. 2 (2021): September

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

License Term

All articles published in Jurnal Beta (Biosistem dan Teknik Pertanian)  are open access and licensed under the Creative Commons Attribution 4.0 International License (CC BY 4.0). This means that anyone is free to:

  • Share — copy and redistribute the material in any medium or format.

  • Adapt — remix, transform, and build upon the material for any purpose, even commercially.

However, this is granted under the following conditions:

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

By submitting an article to Jurnal Beta (Biosistem dan Teknik Pertanian), authors agree to the publication of their work under this open access license. The authors retain the copyright of their work, but grant Jurnal Beta (Biosistem dan Teknik Pertanian)  the right of first publication.

For more information about the CC BY 4.0 license, please visit the official website: https://creativecommons.org/licenses/by/4.0/

Most read articles by the same author(s)

<< < 3 4 5 6 7 8